8889192128

what does rcs northvale do?? they called me from 888-919-2128

i got this off there site
Founded in 1965, RCS's mission is servicing customers with unsurpassed service, quality products, premium benefits and comprehensive solutions.

Have a cleaning and maintenance need?
We've got you covered with our specially formulated cleaning systems.

Its Revere Safety Division, through wholesale distributorships, retail, internet, and catalogue sales, offers safety supplies, personal protective equipment, first aid supplies, industrial safety supplies, traffic safety, maintenance, janitorial and material handling supplies and products. In addition to the Custom manufacture of safety supplies, personal protective equipment, first aid supplies, industrial safety supplies, traffic safety, maintenance, janitorial and material handling supplies and products.

I am a superintendant in the construction industry.  I received a call from 888-919-2128.  The caller id displayed rcs northvale. rcs northvale is located in northvale nj.  they sell construction supplies and safety supplies.  this material is becoming more important in my field due to osha requirements.  below are the benifits of osha for the small to mid sized business owner.

OSHA’s Free On-site Consultation Program
OSHA’s free On-site Consultation Program offers free and confidential advice to small and medium-sized businesses in all states across the country, with priority given to high-hazard worksites. On-site Consultation services are separate from enforcement and do not result in penalties or citations. Consultants from state agencies or universities work with employers to identify workplace hazards, provide advice on compliance with OSHA standards, and assist in establishing safety and health management systems. Read more about OSHA’s free On-site Consultation Program.

Compliance Assistance Specialists (CAS)
Each OSHA Area Office in states under federal jurisdiction has a Compliance Assistance Specialist. These staffers respond to requests for help from a variety of groups, including small businesses. CAS’s put on seminars and workshops for small businesses and other groups. They promote OSHA’s cooperative programs, OSHA’s training resources, and the OSHA web site. To read more about Compliance Assistance Specialists and find a directory of CAS’s in your area, click here.

Penalty Reductions
OSHA takes employer size into consideration when assessing penalties. Please see the OSHA Administrative Penalty Information Bulletin for additional information on small employer eligibility for penalty reductions.

OSHA’s Cooperative Programs
OSHA offers cooperative programs under which businesses, labor groups, and other organizations can work cooperatively with the Agency to help prevent fatalities, injuries, and illnesses in the workplace. For help on deciding which cooperative programs are right for you, see Find a Cooperative Program. If you are located in a State with an OSHA-approved State Plan, please contact your state agency for information about cooperative programs. All States with OSHA-approved programs have their own cooperative programs.

Hispanic/English-as-a-Second Language (ESL) Coordinators
OSHA's Hispanic/English-As-Second-Language (ESL) Coordinators assist a variety of groups, including small businesses, trade associations, union locals, and community and faith-based groups with outreach, education and training to Spanish-speaking workers. The coordinators are available for Hispanic-related seminars, workshops, and speaking events. They promote cooperative programs, such as the Alliance Program, as well as Spanish/other than English training materials, compliance assistance resources, and tools available on the OSHA Web site. There is one Hispanic/ESL Coordinator in each of the ten OSHA Regions. To find the Diverse Workforce/LEP Coordinator in your Region, click here.

Training and Education
OSHA’s Training Institute (OTI) and OSHA’s Training Education Centers across the country provide basic and advanced courses in safety and health. OSHA’s area offices offer information services, such as audiovisual aids, technical advice, and speakers for special engagements. In addition, the Training Centers have begun offering one-day or one-half-day seminars to increase opportunities for small business employers to attend safety/health training.

Susan Harwood Training Grants Program - Training and educational programs for small businesses is a priority for the grants program. The program has funded Small Business Development Centers.

Electronic Tools and Resources
OSHA eTools are "stand-alone", interactive, Web-based training tools on occupational safety and health topics. They are highly illustrated and utilize graphical menus. Some also use expert system modules, which enable the user to answer questions, and receive reliable advice on how OSHA regulations apply to their work site.
OSHA’s Safety and Health Management Systems eTool provides guidance for employers looking to build effective safety and health management systems at their worksites.
OSHA Safety and Health Topics Pages provide access to selected occupational safety and health information. The subjects of these pages include specific workplace hazards, as well as individual industries.
Recordkeeping injury and illness resources.
OSHA's Compliance Assistance Quick Start is a tool to introduce employers and employees, especially those at new or small businesses, to the compliance assistance resources on OSHA’s website.

OSHA's $afety Pays Program is an interactive expert system to assist employers in estimating the costs of occupational injuries and illnesses and the impact on a company's profitability. This system uses a company's profit margin, the AVERAGE costs of an injury or illness, and an indirect cost multiplier to project the amount of sales a company would need to generate in order to cover those costs.

Frequently Cited OSHA Standards is a query tool which allows the user to determine the most frequently cited Federal and State OSHA standards for a given SIC code. The SIC code may be determined by accessing the online SIC Manual.

Publications
OSHA has many publications, including specific topics for small businesses that are available or can be ordered online.

RCS NORTHVALE CALLED ME FROM 888-919-2128.  I DON’T KNOW WHY.

THEY ARE LOCATED AT

POBOX 901
NORTHVALE NJ
07647

LOOKED AT THEIR SITE

WWW.RCSNORTHVALE.COM


ALSO
RCSNORTHVALENJ.COM


THEY SELL LUBRICANTS.

Lubricants perform the following key functions.
•    Keep moving parts apart

•    Reduce friction

•    Transfer heat

•    Carry away contaminants & debris

•    Transmit power

•    Protect against wear

•    Prevent corrosion

•    Seal for gases

•    Stop the risk of smoke and fire of objects

Lubricants are typically used to separate moving parts in a system. This has the benefit of reducing friction and surface fatigue, together with reduced heat generation, operating noise and vibrations. Lubricants achieve this by several ways. The most common is by forming a physical barrier i.e., a thin layer of lubricant separates the moving parts. This is analogous to "hydro-planing", or the loss of friction observed when a car tire is separated from the road surface by moving through standing water. This is termed hydrodynamic lubrication. In cases of high surface pressures or temperatures, the fluid film is much thinner and some of the forces are transmitted between the surfaces through

Typically the lubricant-to-surface frictionis much less than surface-to-surface friction in a system without any lubrication. Thus use of a lubricant reduces the overall system friction. Reduced friction has the benefit of reducing heat generation and reduced formation of wear particles as well as improved efficiency. Lubricants may contain additivesknown as friction modifiers that chemically bind to metal surfaces to reduce surface friction even when there is insufficient bulk lubricant present for hydrodynamic lubrication, e.g. protecting the valve train in a car engine at startup.

Both gas and liquid lubricants can transfer heat. However, liquid lubricants are much more effective on account of their high specific heat capacity Typically the liquid lubricant is constantly circulated to and from a cooler part of the system, although lubricants may be used to warm as well as to cool when a regulated temperature is required. This circulating flow also determines the amount of heat that is carried away in any given unit of time. High flow systems can carry away a lot of heat and have the additional benefit of reducing the thermal stress on the lubricant. Thus lower cost liquid lubricants may be used. The primary drawback is that high flows typically require larger sumps and bigger cooling units. A secondary drawback is that a high flow system that relies on the flow rate to protect the lubricant from thermal stress is susceptible to catastrophic failure during sudden system shut downs. An automotive oil-cooled turbocharger is a typical example. Turbochargers get red hot during operation and the oil that is cooling them only survives as its residence time in the system is very short i.e. high flow rate. If the system is shut down suddenly (pulling into a service area after a high speed drive and stopping the engine) the oil that is in the turbo charger immediately oxidizes and will clog the oil ways with deposits. Over time these deposits can completely block the oil ways, reducing the cooling with the result that the turbo charger experiences total failure typically with seized bearings.Non-flowing lubricants such as greases & pastes are not effective at heat transfer although they do contribute by reducing the generation of heat in the first place.

RCS northvale tried to sell us safety glasses.  Same number 888-919-2128.  We already have a supplier we are happy with.  

You just can't undrestimate the importance of protecting your eyes though.Most of us, as children, remember being told never to run with our pencils in our hand (or any other kind of pointed object). This was because there was a fear that we could fall down, the pencil would jab our eyes, and our vision would be impaired. Thus, the warning for safety of our eyes. But as adults, we need to do much more than this, to protect our eyes. Safety eyewear is an essential factor in eye safety and eye protection.
Who Needs Safety Eyewear
Anyone who works with power tools, lathes, saws, axes, or any kind of welding material, either in the home or at work, needs to wear safety eyeglasses for eye safety. Safety eyewear will keep your eyes protected from small flyaway particles of wood, dust, and other materials, which tend to be a hazard while working with any kind of tools.
Features Of Safety Eyeglasses
•    Safety eye wear is not the same as regular eye glasses. The frames are much thicker and stronger and the lenses of safety eyeglasses are also much stronger than those of regular dress eyeglasses.
•    The American National Standards Institute (ANSI) is an organization that sets standards for manufacturing of products. The ANSI has also set standards for safety eyewear. The lenses in safety eye glasses should be impact resistant and be able to pass what is known as a ‘drop-ball’ test. In this test, a ball is dropped onto the lens of safety eyeglasses from a considerable distance. If the lens can withstand this impact, then it is fit for being used in safety eyewear. If the lens shatters, cracks, or breaks, then it cannot be used for safety glasses.
•    Frames of safety glasses are heat resistant and prevent the lens to be pushed into the eyes of the wearer.
•    Most safety eye glasses are made from plastic polycarbonate lenses. These are much more durable, stronger, and more impact resistant than lenses of regular eyewear.
•    Safety eyewear should be of the right fit. It should not only cover your eyes fully, but also fit perfectly so as to cover the tops and sides of your eyes.
•    Safety eyeglasses usually have the markings of the manufacturer on the lens, frames, and removable eye shields. These markings can help distinguish a pair of safety eye glasses from other eyeglasses, and also determines whether the eyeglasses pass the standards for safety eyewear.
Benefits Of Safety Eye Wear
•    Safety eye wear can keep small particles of wood from entering your eyes, if you work a lot with saws and axes. This is very important as the wood particles can tear the epithelium in your eye and cause permanent eye damage.
•    Safety glasses are beneficial to people who use welding instruments, as they are heat resistant and protect the eyes from sparks and flames.
•    It protects your eyes from chemical splashes, if you work with harmful chemicals.
•    So, if you work with any kind of equipment that may be hazardous to your eye safety, always remember to wear a pair of safety glasses.

rcs northvale called me from 888-919-2128.

they must sell safety supplies

there website is

rcsnorthvale.com

has anyone ever tried there  Superglas Pipeliner Welding Helmet??

heres how they describe it

Pipeliner helmet w/ ratchet headband

Item ID: 110-WH

Molded from Superglas Plus, this helmet is light and strong. Provides everything pipe welders need in a helmet to be safe and productive under the harshest welding conditions. Impervious to moisture, impact-resistant, will not crack, chip or split.

Compact design allows access to areas where there is no room for a standard helmet. Comfortable, functional headgear uses a constant-fit rubber headband for frequent readjustments as pipe welders move about their work.


Also available with a ratchet headgear for use where space limitations are not as severe. White.'


any help?

Concrete Cleaning? A perfect pressure washer job!

Do you love the clean and fresh feel of concrete surfaces like I do? If you have concrete walls, driveways, barriers, walkways, courts, etc., pressure washing is the perfect way to keep it bright and stain-free.

Do you want to clean a horizontal OR a vertical concrete surface?

Here are pro-style cleaning tips for BOTH vertical and horizontal surfaces:


HORIZONTAL CONCRETE SURFACES:


Aside from normal dust, dirt and mud, the most common cleaning problem you'll face with horizontal concrete surfaces is oil/grease or rust.
Water alone is just fine for removing dust, dirt and mud, but you'll definitely need a degreaser to remove oil and grease. The fresher the stain, the more likely you'll be able to lift it! Although there's no absolute guarantee you'll be able to lift every stain.
So if you see an oil/grease stain, attack it right away. But first, remember to absorb as much of the surface oil as you can with clay kitty litter.

Rust, which can deeply invade your concrete surface, is tough to completely eliminate. Many professionals swear by detergents which contain oxalic acid. Remember to follow the manufacturer's application directions!

There are some amazing surface cleaners and water brooms available to homeowners which greatly reduce the amount of time it takes to clean a large, flat, concrete surface. (A surface cleaner accessory is pictured above.)

VERTICAL CONCRETE SURFACES:



The most common dirt on vertical concrete surfaces, aside from dust and mud, is mold, algae or mildew. I often see this in areas of the country that have very hot, humid summers.
You'll need a concrete cleaner to really remove this type of growth - and hopefully keep the algae or mildew from coming back.

And there are some very handy surface cleaners and extension poles which will help you effectively and quickly clean vertical concrete. Always clean from top to bottom, in 3-4 foot widths.

MY TIP: Be forewarned that if you're cleaning colored concrete you should test it in a very inconspicuous place, first, to see if the color comes off! If so, you'll need to contact your concrete contractor or manufacturer for specific cleaning or sealing instructions!
ANOTHER TIP: It sounds very obvious, but please take an extra minute to make sure all of your nearby windows are tightly closed when you're cleaning vertical concrete! Trust me, it's more than worth it to double-check this! Having a window open just a crack can allow for a huge amount of indoor water damage.


When you're cleaning concrete, you'll want to wear jeans and rubber shoes to protect yourself, and don't forget to wear your safety goggles. Never power wash while standing on a ladder, make sure electrical lighting fixtures and jacks are removed or sealed from water.

To find contractor-quality pressure washer attachments & accessories, at low homeowner prices, check out the selection at PressureWashersNow.com I've bought from them and recommend PressureWashersNow.com

Always use your low pressure (black) nozzle to apply your detergent or degreaser and make sure you allow the fluid to rest on the dirty surface for a few minutes! Follow the manufacturer's directions. Let your detergent do the work, making it easier for you to clean.

If you are using a standard pressure washer nozzle, start pressure washing your concrete by holding your white nozzle 3-4 feet away. Slowly move your nozzle closer, IF needed. Change to a more powerful nozzle only if necessary. As hard a concrete can be, it can still be damaged or gouged by pressure washing, so clean slowly and carefully.
Here's a general guideline for cleaning concrete, but remember, it's only a guideline:

PSI RATING --------- Closest Nozzle Distance from Surface

2,000 to 3,000 --- 12" to 18"

3,000+     --- 18" to 30"

And don't forget that Ebay   always has exciting bargains on pressure washers, surface cleaners, water brooms & accessories! Try to get a great deal on Ebay  .

if you are interested in purchasing penetrating oil from rcs northvale.


YOU MUST READ THE FOLLOWING FIRST!!!!!!!!!!!!!!!!!!!!!!

Protect woodwork and keep it looking beautiful with a clear finish
Wood is a common feature in many homes. Floors, tables, chairs, cabinets, dressers and more are made from different types of wood including oak, pine and mahogany. It is a beautiful, durable material that’s available in a wide range of styles. Its versatility and prevalence are two of the primary reasons why applying a finish is so important. Finishes protect wood from scratches, scrapes, nicks and dents, ensuring that it retains its original brilliance for years to come. There are two primary types of finish, penetrating and surface. Choosing which one to use will depend largely on what you’ll be applying it to and how much use a floor or piece of furniture is likely to be subjected to. Keep the following questions in mind as you search for the right finish:

What purposes does a finish serve?
What types of penetrating finishes are available?
What types of surface finishes are available?
What are the appropriate methods for applying finish?
What other steps should be taken to enhance wood’s appearance and durability?

Penetrating Finishes, Surface Finishes and Application

Finishes serve a number of purposes. They seal and protect wood from water damage and stains, provide a tough, durable finish for hardwood floors, bring out the natural beauty in unfinished wood and add gloss and shine to stained furniture. Regardless of whether or not wood has been stained, it should be finished. Like staining, finishing is a project that requires little more than a can of finish, a brush and some patience. Some finishes dry more quickly than others and some require multiple coats. There is no perfect finish that’s ideal for every situation, but there are a number of available finishes that will allow you to find the right fit for the job at hand.

Penetrating Finishes: Penetrating finishes infiltrate wood’s pores and penetrate the fibers. They are oil based, and the most commonly used types are tung oil and linseed oil. Tung oil is derived from the tung tree and provides a beautiful, natural-looking finish. Linseed oil is pressed from flax seeds and has been used as a finish for hundreds of years. Look for linseed oil that has been boiled, which will allow it to dry more quickly. Danish oil is a hybrid of oil and varnish that provides a little more durability than typical oil finishes. Penetrating finishes are best when used on decorative finishes and on surfaces that won’t receive a lot of use. Though they may show scratches, signs of wear can be easily fixed by simply reapplying finish over worn spots.

Penetrating finishes are also known as “air-oxidizing” finishes
They tend to provide a low sheen and take longer to dry than surface finishes
Lemon, walnut and soy oils are sometimes used for penetrating finishes
Linseed oil can take a very long time to dry
Oil and varnish mixes dry more quickly than other oils
Lightly burnishing finishes between coats will help the next layer adhere more easily

Surface Finishes: Surface finishes leave a hard film over the top of a wood surface. Rather than penetrating the wood, it adds an extra layer, creating a buffer between the wood and anything it comes in contact with. That way instead of the wood wearing down or getting nicked, the finish takes the brunt of the damage. Surface finish types include lacquer, shellac, polyurethane, varnish and wax. Varnishes are very durable but dry slowly, making them susceptible to dust and dirt. Shellac is a fast-drying natural resin that may need to be thinned with denatured alcohol prior to application. Polyurethane is amongst the most durable finishes available and is offered in multiple sheens. Water-based surface finishes aren’t as tough as other finishes, but they’re easy to apply.

Surface finishes are a mixture of resins and solvents, sometimes called solvent-releasing finishes
They are more durable and faster-drying than penetrating finishes
Lacquer provides a shiny, water-resistant finish
You may need to filter lacquer prior to application to remove solid particles

Finish    Uses and Benefits    Points to Consider
Lacquer    
Dries faster than other finishes
Can be easily removed
Ideal for furniture
Works well when multiple layers are applied
Gives off noxious fumes when applied
Can be a fire hazard
Do not use over old paint or varnish
Usually sprayed on because it dries so quickly
Oil    
Provides a rich, satin finish
Ideal for furniture and low-traffic areas
Easy to apply
Offers a natural look and feel
Tung and linseed are the most common types
Makes it easy to cover scratches and nicks
Not recommended for high-traffic areas or locations where surface might be abused
Doesn’t resist alcohol or water spills
Dries more slowly
Be sure to protect your eyes and use adequate ventilation during application
Polyurethane    
Provides a highly durable, water-resistant finish
Natural appearance
Available in satin, semigloss and glossy sheens
Ideal for kitchen cabinets, doors, furniture and floors
Not recommended for outdoor use
May yellow or crack when exposed to sunlight unless UV light absorbers are added
Can be difficult to repair if damaged
Shellac    
Provides a hard finish that dries quickly
May be used as a sealer and stain killer on drywall, cured plaster and new wood
Available in multiple colors
Ideal for furniture and floors
Not recommended for wood that will be exposed to moisture
Use denatured alcohol to thin and clean
May break down over time
Varnish    
Available in different sheens
Ideal for use on doors and marine finishes
Can be used on bare or stained wood
Very durable
Must be applied to a clean, dust-free surface with a clean brush
May cause damage to wet surfaces
Use paint thinner for thinning and cleaning
Water-Based    
Dries quickly
Does not yellow with age
Can be used on bare, stained or painted wood
Ideal for protecting decorative finishes
Not as durable as other finishes
Brush marks may show up on surface
Use synthetic brushes to apply
Wax    
Offers a glossy sheen
Easy to remove
Not as durable as other finishes
Needs to be frequently reapplied

Application: How a finish is applied depends in part on what kind of finish it is. Oil-based finishes are easiest to apply with a brush or cloth. In many cases, using a cloth or rag will allow for more precise application. Surface finishes are generally applied with a brush. When applying varnish, it’s particularly important to make sure the surface is free of dust and dirt. Some finishes can give off hazardous or noxious fumes, so be sure to work in a well-ventilated area and use a respirator to protect your lungs. If you’re applying finish to wood that has been finished in the past, be sure to consult the manufacturer’s specifications to see if the two finishes are compatible.

After an oil-based finish has set, wipe off any excess with a rag
The type of finish determines durability more so than the number of coats applied
Lacquer finishes should be sprayed on to ensure even coverage, since they dry so quickly
Use gloves to protect your hands while you work

Features

Stain: Before adding a finish, consider applying a stain. Stains enhance wood’s appearance, add color and emphasize grain contrast. They may add a glossy finish, highlight wood’s natural appearance or make it blend in better with surrounding décor. Finish is applied over the top of stain to protect it.

Conditioner: Prior to applying stain, you may need to use conditioner. Conditioner helps tame wild grain patterns and evens out stain absorbency, preventing blotchy spots. It is particularly useful on soft woods or wood with knots.

Brushes: Brushes are a crucial component in applying some types of finishes. They may be natural, synthetic or foam. Foam brushes are generally inexpensive and won’t shed bristles, but they will wear out quickly and may make it tough to apply a coat evenly. Synthetic brushes are best when used with water-based finishes, as water can sometimes cause natural bristles to swell, making it more difficult to apply stain in a uniform manner. Oil-based finishes, whether penetrating or surface, can be used with virtually any type of brush. Tug on the bristles before you purchase a brush to make sure they don’t come out easily. If they do, they’re likely to stick in the finish and mar the surface of wood.

Sanding: In order to get the perfect finish, chances are you’ll have to do some sanding. Scuff sanding is a process by which coats of finish are sanded to create scratches that allow subsequent coats to achieve a better bond. Once you’ve sanded down the surface, use tack cloth to pick up dust and debris so they don’t become embedded within the finish.

rcs northvale called me from 888-919-2128.  

according to their website they sell industrial, construction + pc supplies.  

rcsnorthvale.com


I didn't know anything else about them but I found this:


RCS Northvale Announces Purchase of International ChemSouth to Create a Stronger, More Dynamic Maintenance Supply Company

NORTHVALE, N.J. Jul 30, 2007



RCS Northvale located in Northvale, New Jersey, is proud to announce that it has completed its acquisition of the goodwill and inventory of Fort Lauderdale, Florida-based International ChemSouth (ICS).


ICS has been in business for the past 20 years, and the company specializes in unique, high quality cleaning products designed for the restaurant, hospital and hotel industries.   An RCS Northvale spokesperson, states, "I am very excited about the opportunity to further service International ChemSouth's customer base, as well as introducing RCS Northvale's customers to the fine products and expertise that has made International ChemSouth the standard bearer in its industry."



The acquisition of ICS underscores RCS Northvale's commitment to lead and define the industrial maintenance field. RCS Northvale's acquisition of ICS does not include assumption of any debt or liability of International Chemical South.




For more information, call (888) 919-2128

MY COMPANY IS SUPER INTO SAFETY THEY MADE US MEMORIZE THE FOLLOWING.

The 3 Keys of OSHA Safety Compliance :
Training-OSHA imposes training and education requirements for almost all standards. To determine the training needed for your company it is vital to do a hazard assessment or self-audit. It also is crucial to document the employees training and conduct regular supplemental training.
Written Programs- Many of OSHA's standards require you to create a written program. One example is a Company Safety Manual. This is a comperehensive reference for all your company's polices and procedures on how to work safely.
Remaining Current-It is not enough to just have training programs and written policies. They must be current, utilized, reviewed, and updated as necessary. A company with an out-of-date program is viewed by OSHA the same as a company without a program

got a voicemail from rcs northvale

888-919-2128

they sell safety supplies

we do not buy from them.  i found their site

rcsnorthvale.com

Beware of RCS.  They will ship you supplies that you did not order and harass you when you do not pay.  SCAM!

They scam companies by tricking junior employees into saying yes to something (they don't know what they're agreeing to), then shipping the company overpriced products they don't need!